SIRUI has introduced the BH-60, an integrated ball and fluid head that combines a 60mm ball head for still photography with fluid-style pan and tilt movement for video. A single mode selector ring switches between the two, so hybrid shooters can work with one tripod head instead of carrying two. The head weighs 950g, provides 5kg of counterbalance in video mode, and holds up to 20kg when locked in photo mode. Pre-orders open on October 15, 2026, and the BH-60 goes on sale on October 20, 2026.
What Is the SIRUI BH-60 Ball and Fluid Head?
The SIRUI BH-60 is a 2-in-1 tripod head that works as a ball head for photos and a fluid-style video head for footage. Turning the mode selector ring changes it from free ball movement to controlled pan and tilt, with no head swap required.
Photographers who also shoot video usually carry a ball head for fast framing and a separate video head with a handle for smooth pans. The BH-60 places both functions in one body.
BH-60 at a glance
| Feature | Detail |
|---|---|
| Type | Integrated ball + fluid head |
| Mode switching | One turn of the mode selector ring |
| Net weight | 950g |
| Ball diameter | 60mm |
| Static load (photo mode, locked) | Up to 20kg |
| Counterbalance (video mode) | 5kg |
| Pan / tilt range (video mode) | 360° / ±40° |
| Quick release | Arca-Swiss compatible, dual lock |
| Damping | All-mechanical, no damping oil |
How Do the Three Modes Work?
The BH-60 has three positions on its mode selector ring: Full-Motion for photos, Neutral for transitions, and Limited-Motion for video. To switch, turn the ring until the red marker lines up with the symbol for the mode you need.
| Position | Ring marking | Movement | Best for |
|---|---|---|---|
| Full-Motion (Photo Mode) | 360 symbol | Free ball movement: wide-angle tilt, roll, and 360° pan | Landscapes, wildlife stills, portraits, panoramas |
| Neutral (Transition) | Dot | The ball is held lightly for smooth, controlled repositioning | Moving between framing setups |
| Limited-Motion (Video Mode) | Cross symbol | Roll locked out by mechanical hard stops; 360° pan and ±40° tilt | Pans, tilts, and subject tracking |
The ±40° tilt limit applies only in video mode. Switching back to photo mode unlocks the full tilt and roll range of the ball.
Photo Mode: A 60mm Ball Head with 20kg Static Load
In photo mode, the BH-60 works as a full-motion ball head. You position the camera freely, then lock it with the damping locking knob, and the 60mm ball holds that position with up to 20kg of static load.
A locked landscape composition stays level during long exposures, and a camera with a telephoto lens stays on target while you wait for wildlife. The large ball gives more contact surface than a small ball head, which helps the lock stay firm with heavier camera and lens combinations. The same knob also sets ball tension, so you can loosen it slightly for fine adjustments before locking it fully.
Video Mode: Smooth Pans and Tilts with 5kg Counterbalance
In video mode, the BH-60 behaves like a fluid tripod head. Mechanical hard stops lock out roll so the horizon stays level, while 360° pan and ±40° tilt remain available. Built-in counterbalance and fixed pan and tilt drag keep camera moves smooth and even.
What the 5kg counterbalance does: counterbalance pushes back against the camera's weight as it tilts. With a balanced setup, the camera stops and holds at any tilt angle instead of drooping when you let go of the handle, and a light push starts a smooth move. The 5kg rating suits mirrorless and DSLR bodies with standard zoom or medium telephoto lenses.
Fixed drag: pan and tilt drag is fixed rather than adjustable. It is set to keep motion free of drifting, stuttering, or shaking at both fast and slow speeds, which suits short videos, events, live streaming, and tracking birds or sports.
The 23cm control handle attaches on the right side of the head and can be removed for photo work.
360° Panning Base for Panoramas
The BH-60 has a 360° panning base with a graduated scale and an independent panning knob. Because panning happens below the ball, you can level the camera once and rotate it horizontally without changing the tilt. The scale markings help you rotate by consistent increments between frames, which simplifies panorama stitching.
Dual-Lock Arca-Swiss Quick Release Plate
The BH-60 uses an Arca-Swiss compatible quick release clamp with two locks, a lever lock and an integrated safety button, so the camera stays secured even if the lever is opened by accident. The lever works in three steps:
- Half-open (90°): the plate stays in the clamp but can slide.
- Slide forward or back: set the balance point for your camera and lens, which helps the counterbalance work best in video mode.
- Fully open (180°): remove the plate.
Because the clamp follows the Arca-Swiss standard, it fits most cameras and supports, and third-party plate tension can be fine-tuned with the supplied hex key.
All-Mechanical Build and Design Details
The BH-60 uses all-mechanical, low-friction damping with no damping oil. This reduces the effect of temperature and environmental conditions on how the head moves, and the aluminum alloy body is cold-resistant and corrosion-resistant for outdoor use in harsh conditions.
Smaller details support everyday use:
- Bubble level to confirm the camera is level at a glance
- Built-in magnetic hex key stored on the head for quick adjustments
- Universal mounting: a 1/4" screw on top, and a 3/8" bottom thread with a 1/4" adapter included
Why Use One Hybrid Head Instead of Two?
A hybrid tripod head reduces the gear you carry and the time you spend changing setups. The BH-60 replaces a ball head and a separate video head with one 950g head, and switching between stills and footage takes one turn of the ring instead of a head swap. For background on how the two kinds of support differ, see our guide to the differences between photography tripods and video tripods.
Who Is the SIRUI BH-60 For?
The BH-60 is designed for photographers and creators who shoot both stills and video and want one head for static setups and camera movement.
| Use case | How the BH-60 helps |
|---|---|
| Landscape photography | Frame freely, then lock for long exposures and panoramas |
| Wildlife and bird photography | Reposition quickly in photo mode, or track subjects in video mode |
| Video creation and live streaming | Counterbalance and fixed drag for steady pans and tilts |
| Portrait photography and video | Lock the frame for stills, or switch modes for interviews and clips |
| Travel videography | One head for photo and video, with less gear to carry |
Before relying on the counterbalance for video moves, check that your camera and lens fall within the 5kg range. Our article on using a heavy camera on a lightweight tripod covers how to match gear weight to your support.
Three Ways to Set Up the BH-60
| Setup | Total weight | Best for |
|---|---|---|
| BH-60 head only | 950g | Swapping the head on an existing tripod or monopod |
| AM-324S + BH-60 | About 2.3kg | Travel shoots, hiking, and lightweight photo and video work |
| SVS60 + BH-60 Professional Video Kit | About 3.28kg | One-step height adjustment and tripod-to-monopod conversion, from locked-off shots to run-and-gun shooting |
SIRUI BH-60 Specifications
| Specification | BH-60 |
|---|---|
| Type | Ball + fluid head |
| Material | Aluminum alloy |
| Color | Black |
| Camera platform | Arca-Swiss quick release, safety lock included |
| Pan / tilt drag | Fixed |
| Pan range | 360° |
| Tilt range | ±40° (video mode) |
| Counterbalance | 5kg |
| Static load | Up to 20kg (locked in Full-Motion mode) |
| Net weight | 950g |
| Ball / base diameter | 60mm / 68mm |
| Handle length | 23cm |
| Dimensions (L × W × H) | 84 × 90 × 131mm |
What's in the box: pouch, BH-60 head, 23cm removable control handle, hex key, 1/4" adapter, warranty card.
When Is the SIRUI BH-60 Available?
Pre-orders for the SIRUI BH-60 open on October 15, 2026, and the head officially goes on sale on October 20, 2026, through the SIRUI official store.
Final Thoughts
The SIRUI BH-60 brings ball head and fluid head functions into one 950g body. Photo mode gives free positioning on a 60mm ball with up to 20kg of static holding capacity, while video mode adds roll lock, 360° pan, ±40° tilt, 5kg counterbalance, and fixed drag for steady camera moves. For photographers who regularly switch between stills and video, it removes the need to carry and swap two heads, whether used on an existing tripod or as part of a travel or video kit.
FAQ
How is the BH-60 different from a ball head or a video head?
A ball head moves freely in all directions for still photography, while a video head offers controlled two-axis pan and tilt for footage. The BH-60 combines both and switches between them with the mode selector ring.
Is the drag adjustable on the BH-60?
No. Pan and tilt drag are fixed to keep motion smooth and free of drifting or stuttering. The damping locking knob adjusts ball tension, not pan and tilt drag.
Can the handle switch sides or be removed?
The 23cm control handle is removable, but it mounts on the right side only.
Does the BH-60 fit all tripods?
The BH-60 has a 3/8" bottom thread and comes with a 1/4" adapter, so it fits most tripods and monopods with standard threads.
When can I buy the SIRUI BH-60?
Pre-orders open on October 15, 2026, and the BH-60 goes on sale on October 20, 2026.
